| Product SKUs | | SYS-8048B-C0R3FT | - SuperServer 8048B-C0R3FT (Black)
|
| | Motherboard |
Super X10QBL-CT |
| | Processor/Cache | | CPU | - Intel Xeon processor E7-8800 v3 / E7-4800 v3 / E7-8800 v2 / E7-4800 v2 family (up to 18 Cores and 165W TDP)
- Quad Socket R1 (LGA 2011)
| | Cache | | | System Bus | | | Note: | - E7-48XX/88XX v3 family requires Rev. 2.0x or above mother board w/ Jordan Creek II
|
| | System Memory | | Memory Capacity | - 32x 240-pin DDR3 DIMM slots
- Supports up to 2TB DDR3, ECC Registered memory (RDIMM/LRDIMM) in 32 DIMM slots
| | Memory Type | - 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 64GB, 32GB, 16GB, 8GB, 4GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | On-Board Devices | | Chipset | | | SAS | - SAS2 (6Gbps) via LSI 3008 controller
| | SATA | - SATA2 (3Gbps) with RAID 0, 1, 5, 10
- SATA3 (6Gbps) with RAID 0, 1
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| | Network Controllers | - Intel X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
| | Graphics | |
| | Input / Output | | SAS | | | LAN | - 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI on AOM
| | USB | | | Serial Port / Header | - 2x Fast UART 16550 ports: 1 rear and 1 header
| | DOM | - 2x DOM (Disk on Module) power connectors
|
| | System BIOS | | BIOS Type | - 16MB SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| | | Chassis | | Form Factor | | | Model | |
| | Dimensions and Weight | | Height | | | Width | | | Depth | | | Weight | - Net Weight: 65.5 lbs (29.7 kg)
- Gross Weight: 86.0 lbs (39.0 kg)
| | Available Colors | |
| | Drive Bays | | Hot-swap | - 5x 3.5" Hot-swap Drive Bays
|
| | Expansion Slots | | PCI-Express | - 2x PCI-E 3.0 x16 Full-heigh slot
- 2x PCI-E 3.0 x8 Full-heigh slot
|
| | Backplane | | SAS/SATA HDD Backplane |
| | System Cooling | | Fans | - 3x 9cm Heavy Duty fans with speed controlCooling Fans
- 3x 8cm Heavy Duty fans with speed controlCooling Fans
| | Shrouds | - 1x Air Shroud (MCP-310-74806-0B)
|
| | Power Supply | | Redundant 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 | | AC Voltage | - 100-240 V, 50-60 Hz, 15 Amp max
| | +12V | - 100 Amp/115 Vac
- 117 Amp/230 Vac
| | With Power Distributor | - +5V: 30 Amp
- +3.3V: 25 Amp
- -12V: 0.6 Amp
| | Certification | Platinum Certified |
| | PC Health Monitoring | | CPU | - Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
| | FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
| | Temperature | - Monitoring for CPU and system environment
- Thermal Control for 9x fan connectors
| | Other Features | - Chassis intrusion detection
|
| | Operating Environment / Compliance | RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|